SPECIFICATION

Battery Included: no

Control Handle Length: 45-56cm/17.71-22in

Gross weight: 12kg/26.45lbs

Input Voltage: 12v

Material: Aluminum Alloy, Nylon, ABS, Copper

Net Weight: 10kg/22lbs

No-load Speed: 1900r/min

Number of Propeller Blades: 3

Output power: 626w

Packing Size: 130*48*17cm/51.18*18.89*6.69in

Suitable Number: 6-8 People

Thrust: 36.28kg/80lbs

Electric Trolling Outboard Motor 80lbs Thrust, 12V 626W with 5 Forward 3 Reverse Gears, for Fishing Boat 6-8 People

Application

It is suitable for small boats of different materials, such as inflatable boats, iron boats, plastic boats, wooden boats, fishing boats, and sailboats.

Specifications

Material: Aluminum Alloy, Nylon, ABS, Copper

Input Voltage: 12v

Output power: 626w

Suitable Number: 6-8 People

Speed Regulation: Forward 5 Gears, Backward 3 Gears

Motor Type: Brush

Number of Propeller Blades: 3

No-load Speed: 1900r/min

Control Method: Manual Control

The Fixing Method of the Hull and the Propeller: Suspended

Power Mode: Motor Drive (Battery Needs to be Purchased Locally)

Thrust: 36.28kg/80lbs

Net Weight: 10kg/22lbs

Gross weight: 12kg/26.45lbs

Traction Force: 1850kg/4078lbs

Packing Size: 130*48*17cm/51.18*18.89*6.69in

Main Pole Length: 91cm/36in

Control Handle Length: 45-56cm/17.71-22in

Package Included

1* Electric Trolling Outboard Motor

1* Fan Blade

1* English User Manual

All Accessories Necessary for Installation

Notes

1. The actual correct power rating of the product is 626W. Please disregard the information on the product label.

2. 80 lbs is the displayed value; the product's actual thrust is 55 lbs.

3. Be sure all switches are in the OFF position before connecting to the battery. Electrical arcing near the battery could ignite hydrogen gas and cause the battery to explode.

4. Before the installation, Make sure the area between the column and bracket is clear.

5. Please do not allow children to operate the electric outboard motor.

6. Please do not modify the unit in any way or add accessories not intended for this product.

7. Never fully submerse the unit, if the unit is accidentally submersed disconnect the battery and leave it to dry.

8. Always disconnect power from the motor when replacing the propeller, removing debris around the prop, charging batteries, transporting the boat or when the motor is not in use.

9. To prevent accidental damage of the shaft, do not over tighten the mounting bracket. Only use this product between the temperatures of -20℃ to +45℃ (-4℉ to +113℉).

10. The motor can only be used in water that is deeper than 1.5m/4.92ft.

11. Remember to wash the motor using fresh water after using it in salt water as it can greatly reduce the possibility of corrosion.

12. Remember always disconnect from batteries once the motor leaves water as a rotating propeller can cause personal injury.

13. Please choose a 12v 30-120AH battery, and choose the corresponding ampere hour battery according to the usage time. Please note that the battery is not included in the package.

14. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

Details

Pure Copper Motor: It is equipped with a high-performance all-copper motor underwater motor system with low heat loss and more power-saving, allowing it to work more efficiently.

Three-Blade Propeller: This motor uses an anti-tangle three-blade propeller to replace the traditional manual boat propeller. This propeller has a fast speed and allows the boat to be driven quickly.

Mounting Bracket:The electric trolling outboard motor has a mounting bracket on the rod, which is used to secure the engine firmly on the boat. It is also very easy to install.

Power wiring: The connecting wire is made of the full copper inner core, which is effectively waterproof, and corrosion-proof, with quality assurance.

High-quality Main Pole: The main rod is made of aluminum alloy, which is light, tough, and corrosion resistant, ensuring a long service life.